BPTHV - POLYMATE BASE COAT
- MSDS: BPTHV
- Manufacturer: CONKLIN CO INC
- Product Name: POLYMATE BASE COAT
- National Stock Number: 8010-00N033662
Product Identification
Product ID:POLYMATE BASE COAT
MSDS Date:03/09/1990
FSC:8010
NIIN:00N033662
MSDS Number: BPTHV
Responsible Party
SHARKOPEE, MN 55379
US
Emergency Phone: 800-228-5635
Info Phone: 612-445-6010
Cage: 52601
Contractor
Telephone: 612-445-6010/800-228-5635
Cage: 52601
Ingredients
ALUMINUM HYDROXIDE; (ALUMINA TRIHYDRATE)
CAS: 21645-51-2
RTECS: BD0940000
Fraction By Weight: 35%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 1%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRITATION, PROLONGED
CONTACT MAY CAUSE SKIN IRRITATION. SWALLOWING MAY CAUSE IRRITATION
TO MOUTH, THROAT OR STOMACH. PROLONGED INHALATION AT LOW
CONCENTRATIONS MAY CAUSE HEADACHES, NAUS EA AND DIZZINESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH THORO W/SOAP & H*2O, FOLLOWED BY A THORO RINSE
W/COOL H*2O. REMOVE CONTAM CLTHG & WASH BEFORE RE-USE. IF IRRIT
CONTINUES CNTCT PIOS CTR/SEEK MED ATTN. EYES:IMMED FLUSH W/PLENT OF
COOL RUNNIN G H*2O, FOR @ LST 15 MIN. REMOVE CNTCT LENSES, IF
APPLICABLE & CONTINUE FLUSHING FOR @ LST 15 MIN. IF IRRIT CONTINUES
CNTCT POIS CTR/SEEK MED ATTN. INHAL:IMMED MOVE TO FRESH AIR. FOR
ANY (SUPP DATA)
Fire Fighting
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:COLLECT WITH ABSORBENT MATERIAL OR MECHANICAL
DEVICE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID FREEZING.
Other Precautions:DO NOT BREATHE MIST. PREVENT SKIN EXPOSURE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED MIST/ORGANIC VAPOR
RESPIRATOR.
Ventilation:MECHANICAL VENTILATION IS ADEQUATE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: INHALATION POISON, IMMEDIATELY CALL POISON CONTROL
CENTER OR MD FOR FURTHER INSTRUCTION. INGEST: DILUTE WITH 1-2 CUPS
OF WATER OR MILK, IF VICTIM CAN SWALLOW. IMMEDIATELY CALL POISON C
ENTER OR PHYSICIAN FOR FURTHER INSTRUCTIONS.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32F,0C
Vapor Pres:17
Spec Gravity:1.24 (H*2O=1)
pH:9
Solubility in Water:MISCIBLE
Appearance and Odor:GRAY
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.